Trackside and Railway

Traditional wooden type crossings like this would have been used on occupation crossings.This kit could be cut down to use on single track road or farm track and pedestrian crossings at the end of a platform.The laser cut kit contains;2 sets centre boards 45mm long4 sets of outside boards 45mm longM..

Add interest with an  assortment of large, medium and small wooden crates.Set contains 12 pieces.Colours may vary from image. Scale 1:60 / 1:148 for N gauge model railways...

Oil Drums or Barrels to use as a load or as detail for your goods yard or oil depot.The pack contains ten 3D printed barrels, split into six black, two red and two green, and are all made from photopolymer resin.They are pre-painted and can be placed onto your scene straight from the pack.Size 5.3mm..

Add interest with this small set of boxes and parcels which includes an assortment of colourful, highly detailed crates, boxes, bags and sacks of varying shapes and sizes.Set contains 6 pieces. Colours may vary from image. image of OO kitScale 1:60 / 1:148 for n gauge model railways...

A detailed model kit of the standard British Railways type buffer stop. Three plastic moulded parts in brown which, after assembly, clip onto the rails.Recommended to be used with:PECO N Gauge Code 80 and Code 55 Streamline track systems.Two buffers per pack...

This ready built buffer clips on to N gauge track. Supplied in packs of 2 Brown Plastic buffers.Fits Peco Setrack N Gauge Code 80 and being fully compatible with both Code 80 and Code 55 Peco Streamline, it need never be discarded as your layout develops.Scale 1:148 N gauge..

NEW from JuweelaA pack of two ready built wooden buffers for N gauge.Still found overgrown at the end of rails in yards everywhere.Use them in an abandoned siding over grown with weeds and brambles. Supplied ready made and weathered, however you can paint or weather them to ..

This is a laser-cut kit in wood and has to be constructed and painted.The kit makes two buffers.Gravel not included image shows made and painted kit.Scale 1:76 OO...

A common feature of country stations large and small, Livestock was conveyed on British railways until around 1973, Many cattle docks remained in place unused, becoming overgrown - an interesting scenic feature.This kit to be made is from Ratio Models and is supplied with pre-coloured parts although..

From Juweela, Black Coal.Very small natural-looking black coal in a very small scale.50g bag around 70cm³ Lots of loads for Z gauge and about 7 for N gauge.Particle size average < 1mmMade of natural products,Suitable for N and Z ..

Coal Staithe kit in real wood.This coal staithe, built from old sleepers, is a typical looking staithe and will sit in any railway siding or yard coal depot.An easy to make laser cut plywood kit which comes in only four parts and a base, no instructions needed.Can be made without the centre divider ..

Concrete bollards are found anywhere vehicle access is denied or to  stop vehicles from crashing into areas,  public buildings, works or industrial buildings, public spaces and pedestrian areas, are just a few.Scale 1:148 scale for N gauge size models ..