Flexyway Granite Sett Track Infills Juweela 28379

New from Juweela, If you are looking for a fantastic and realistic street surface look no further,

At last an easy way to fill the gap over the sleepers between the tracks.

Size of each section can be adjusted to suit your track;

13.7mm, 10.5mm and 7.5mm wide. x 1.5mm thick x 315mm long.

The gap segments are cut out with a knife or scalpel and simply placed in the track gap on the sleepers.

If a radius is required complex cutting is required, the segments need to be cut in the joints and fanned out as a curve, the small side remnant stones need to be removed as a strip and replaced after. This is best done off scene and glued to a thin backing to hold the cut segments together.

Flexyway are solid sett stones that sit individually on a thin carrier foil. This makes the entire segment flexible. 

Each sett can be removed individually so potholes or damaged areas can be constructed where desired.

The segment can be cut or joined anywhere between the setts.  The joints and combined segments are not visible when finished, so creating and continuous road or path which is not normally possible with most roadways.

In addition, weathering is possible with water-based colour. 

Pack size;

6 x infill sections,  total length 1890mm

Also comes with a small pack jointing dust.

This pack is used to add detail to your other flexyway roads and matches with individual ceramic stones size 1.5mm x 1.5 mm - irregularly broken

Some images are for reference only and may not be the product described above.