Adhesives & Fillers

Designed specifically for the rapid construction of wood and card laser-cut kits.Now in a new  easy to hold, plastic bottle with an integrated detachable needle applicator and needle cleaning pin.The  low viscosity formula and needle applicator ensure easy application directly onto open or..

This wax adhesive is for holding miniatures in place whilst allowing re-positioning or removing at any time.Use to hold miniature figures in place on model railways.To hold small screws on the end of a screwdriver to aid fitting.To hold small objects in place in dolls house scenes.Hold very small ob..

Simply Stick on Figures and Accessories & Remove As Needed!With NOCH Temporary Glue, small parts, e.g. figures, cars, houses and much more can be easily attached to different surfaces and removed again.NOCH Temporary Glue is water-soluble, transparent when dry and leaves no residue on the area.A..

UHU All Purpose Adhesive - glues wood, wood based materials, , metal, glass, porcelain, ceramic, leather, rubber, felt, cork, fabrics, cardboard, paper, many plastics, ABS, hard and soft PVC and much more.Do not use at temperatures below +5 °C.Materials to be glued must be clean, dry and ..

UHU POR - For expanded polystyrene, Styropor® also in combination with other materials, e.g. wood, paper, metal, ceramic, plaster, fabric and various plastics.Quick-settingElastic adhesive film is colourless, non-ageingWaterproofDo not use at temperatures below +5°C.The surface must be dry, clean a..

Plastic Magic 10 sec cement is a thin liquid plastic cement with a 10-15 sec adjustment time & non-clog action.Use where a longer working time is required for perfect positioning.  It is non-toxic, non-flammable with minimal odour and almost zero emissions when compared to competitors.Bonds..

Deluxe Materials new formula Plastic Magic is a low odour liquid solvent glue that produces invisible glue lines.New product, now with two high precision long brushes. Plastic Magic bonds nearly all commonly used modelling plastics including polyester, acrylic, styrene, ABS, PVC,..

Known to experienced model makers as EMA Plasweld, this solvent sticks all normal model making plastics, i.e. perspex, ABS, butyrate, styrene, acrylic etc. It has a long shelf life, is fast acting (grabs in seconds), and has a water-like consistency so it is best used by holding or clamping the surf..

The whole plastic solvent cement kit.Touch-n-Flow System is a 3-piece set including the popular Touch-n-Flow applicator, applicator squeeze bottle and Plast-i-Weld liquid solvent cement.  Use of the squeeze bottle makes a convenient way to fill and empty the Touch-N Flow applicator.Content..

4pc syringe applicator kit.Suitable for accurate application ofPVA Glue and other glues or Oils and GreasesContents:2 x 10ml Syringes, 1 x 0.8mm Needle1 x 1.2mm Needle.Syringes are also ideal for measuring out airbrush paints and filling colour cups.Can be used with or without the fine needles. NOT ..

The Touch-N-Flow Applicator is a light-weight, easy-to-handle tool for applying liquid solvent cements.  This product is gravity fed allowing an exact application of solvent cement according to the angle it’s held at.  The Touch-N-Flow Applicator has the ability to; join seams wi..

From Deluxe Materials Easy and accurate application for metal etch parts  Have you been looking for the perfect adhesive for Photo Etch? Look no further than Deluxe Materials Photo Etch Glue. It is water based, easily spread, non-brittle and for bonding all types of photo etch to plastic an..